Sony PCV-E203 - Manual (Page 40)

VAIO MicroTower System Reference 32
9
If necessary, remove any add-in cards (see “Removing an Add-in
Card” on page 29) to gain access to the battery. You may also need to
disconnect some cables.
10 Insert a small flathead screwdriver into the small space at the top of
the battery holder.
11
Gently pry the battery out and dispose of it according to the
instructions that came with the new battery.
12
Insert the new battery into the battery holder, with the plus (+) side
up.
13
Reinstall any add-in cards that were removed.
14 Reconnect any cables that were disconnected.
15 Reinstall the bottom panel (see “Reinstalling the Bottom Panel” on
page 26).
16
Reinstall the side panel (see “Reinstalling the Side Panel” on page 27).
17
Reconnect the power cord and turn on the computer.
!
Touch any exposed metal part of chassis to discharge static electricity in
your body before handling an add-in card or other sensitive electronic
component.
✍
The Sony CR2032 battery is recommended.
KY0072.VSD