Sony PCV-E203 - Manual (Page 32)

VAIO MicroTower System Reference 24
Removing the Front Panel
You must remove the front panel to install system memory, which
requires pulling the diskette drive out about two inches.
1
Insert a straightened paper clip into the emergency-eject hole on the
CD-ROM drive (PCV-E201) or CD/DVD-ROM drive (PCV-E203/
PCV-E205) to open the tray.
2
Pull the tray out to its normal opened position.
3
Lift up on the front tray cover to remove it.
4
Remove the bottom panel (see “Removing the Bottom Panel” on
page 23) to access the two plastic tabs on the bottom of the front
panel.
5
Push down and out on the two plastic tabs from inside the bottom of
the chassis to release the bottom end of the front panel.
6
Pull out the top end of the front panel to remove it.
KY0055.VSD
Tab
Front panel
Front tray cover
Push tabs out from
inside chassis