Sony KDL-60W850B - Manual (Page 207)

Change the current setting of [CineMotion] to another setting.
Set [LNA] to [Off] to improve picture reception. ([LNA] may not be available
depending on the situation/region/country.)
Perform [Fine Tune]/[AFT] in [Manual Program Preset] to improve picture
for analog reception.
Make sure that the antenna is connected using a 75-ohm coaxial cable.
The screen flickers.
Set [Motionflow] to other than [Impulse] (e.g. [Standard]).
No color/Dark picture/color is not correct/Picture is
too bright
Press the OPTIONS button, then select [Picture Adjustments] to make
adjustments.
Select [Reset] in [Picture Adjustments].
If you set [Power Saving] to [Low] or [High], the black level will be
enhanced.
Dark screen. How to brighten the screen.
Adjust [Backlight] or [Picture] in [Picture Adjustments].
Check the [Power Saving] option setting. If it is [Low] or [High], the screen
darkens. Set [Power Saving] to [Off] to brighten the screen.
Color is not correct. How to adjust the color tone.
Adjust [Hue] or [Color Temperature] in [Picture Adjustments].
To deepen the color tone, adjust [Color] or [Live Color] in [Picture
Adjustments].
There is lag between video and sound.
When enjoying Karaoke from a connected device, set [Scene Select] to
[Game].
Screen format/wide mode changes automatically.
When changing the channel or video input, if [Wide Mode] in [Screen] is
set to [On], the current [Wide Mode] setting is automatically changed
according to the input signal. To lock the [Wide Mode] setting, set [Auto
201