Sony SS-SR3000P User Manual

Ss-sr3000, Speaker system

Advertising
background image

SS-SR3000 4-460-835-12(1) GBFRES

+

Speaker System

SS-SR3000

4-460-835-12(1)

© 2013 Sony Corporation Printed in Malaysia

Amplifier

Amplificateur

Amplificador

Standard Connection/Raccordement standard/

Conexión normal

Foot pads

Tampons de pieds

Almohadillas para las patas

For customers in the United States

Owner’s Record

The model and serial numbers are located on the rear

of the unit. Record these numbers in the space provided

below. Refer to them whenever you call upon your Sony

dealer regarding this product.
Model No.
Serial No.

Connection

• Before connecting, turn off the amplifier to avoid

damaging the speaker system.

• This speaker system is driven best by an amplifier

or receiver rated as per the wattage indicated in the

specification section.

Note

Avoid driving the speaker system continuously with a

wattage exceeding the maximum input power of this

speaker system.

Precautions

• Do not attempt to open the enclosure or remove

speaker units. There are no user-serviceable parts

inside.

• Keep recorded tapes, watches, and personal credit

cards using magnetic coding away from the speaker

system.

• Periodically wipe the cabinet with a soft cloth. Do

not use any type of scouring powder, abrasive pad or

solvent.

Speaker Placement

Please note that room acoustics can often produce large

difference in the sound for small changes in speaker

placement.

• Set up your speaker system on a hard, flat place.

• Place the speaker system against a hard wall with

its back about 10 cm (4 in) away from a wall. The

proportion of bass increases as you move a speaker

closer to intersecting room surfaces (wall and wall,

etc.).

Attaching the foot pads

Be sure to attach the supplied foot pads to the bottom of

the speaker to stabilize the speaker and prevent it from

slipping.

Specifications

Speaker system

Full range

Speaker units

70 mm (2 3/4 in), cone type

Enclosure type

Bass reflex

Rated impedance

8 ohms

Power handling capacity Maximum input power: 120 W

Sensitivity level

85 dB (1 W, 1 m)

Frequency range

150 Hz - 20,000 Hz

Dimensions (w/h/d)

Approx. 110 mm × 170 mm ×

111 mm (4 3/8 in × 6 3/4 in ×

4 3/8 in) including front grille

Mass

Approx. 0.9 kg (1 lb 16 oz)

Supplied accessories

Speaker cord (1)

Foot pads (4)

Design and specifications are subject to change without

notice.

English

Advertising