Sony DCR-DVD100 - Manual (Page 32)

32
To use the zoom feature
Move the power zoom lever a little for a slower zoom. Move it further for a faster zoom.
Using the zoom sparingly results in better-looking recordings.
W: For wide-angle (subject appears farther away)
T : For telephoto (subject appears closer)
To use zoom greater than 10
×
Zoom greater than 10
×
is performed digitally. Digital zoom can be set to 20
×
or 120
×.
The picture quality deteriorates as you move the power zoom lever towards the “T”
side.
To activate digital zoom, select the digital zoom power in [D ZOOM] in the SETUP
display (page 110). The digital zoom is set to [OFF] as the default setting.
Note
You cannot use the digital zoom to shoot still images.
Tip
If you cannot get a sharp focus, move the power zoom lever to the “W” side until the
focus is sharp. You can shoot a subject that is at least about 80 cm (about 2 feet 5/8 inch)
away from the lens surface in the telephoto position, or about 1 cm (about 1/2 inch)
away in the wide-angle position.
Shooting movies/still images
T W
The right side of the bar shows
the digital zooming zone.
The digital zooming zone
appears when you select the
digital zoom power in the
SETUP display.