Sony NW-E505 - Manual (Page 51)

51
Other Information
To delete abnormal data from the built-in flash memory
If “CANNOT PLAY”, “EXPIRED”, “FILE ERROR”, or “MG ERROR” is displayed, there is a
problem with all or part of the data stored in the built-in flash memory.
Please follow the procedures below to erase data you cannot play.
1
Connect your Network Walkman to the computer, and start the SonicStage software.
2 If you have already specified the data with problems, erase the data from the Portable Player
window of the SonicStage software.
3 If the problem persists, transfer all data without problems back to the computer using the
SonicStage software while your Network Walkman is connected to the computer.
4
Disconnect your Network Walkman from the computer and then format the built-in flash
memory using the Format menu (page 37).
Message
MG ERROR
NO DATA
PRESET FULL
USB Connect
Meaning
An unauthorized distribution file is
detected for copyright protection.
There are no audio files in the
built-in flash memory.
30 broadcast stations are already
preset.
Your Network Walkman is
connected to a computer.
Icon animates from left to
right: Accesses to the built-in flash
memory is in progress.
Remedy
Transfer the normal audio file back to the
computer and then format your Network
Walkman. For details, refer to “To delete
abnormal data from the built-in flash
memory” on page 51.
If there are no audio files in the built-in
flash memory, use the SonicStage
software to transfer audio files.
You can preset up to 30 broadcast
stations. If you want to preset more
stations, delete unnecessary stations first
(page 43), then preset the stations you
want.
This is not a malfunction. You can
operate your Network Walkman using the
SonicStage, but you cannot operate the
controls on your Network Walkman.
Your Network Walkman is accessing to
the built-in flash memory. Wait until the
access completes. This message is
displayed when transferring data to the
built-in flash memory or formatting the
Network Walkman.