Trouble check – Sony CCD-TRV85 User Manual

Page 74

Advertising
background image

74

Trouble check

Symptom

Cause and/or Corrective Actions

• The START/STOP MODE switch is set to 5SEC or

.

m Set it to

. (p. 15)

• The battery is dead.

m Use a charged battery pack or the AC power adaptor. (p.

7, 25)

• Moisture condensation has occurred.

m Remove the cassette and leave the camcorder for at least

1 hour. (p. 67)

• You pressed DATE and TIME together for more than 2

seconds.

m The camcorder is not malfunctioning. You may start

recording. Flashing will stop soon.

• The lithium battery is weak or dead.

m Replace the lithium battery with a new one. (p. 59)

• The POWER switch is set to CAMERA or OFF.

m Set it to VTR.

• The tape has run out.

m Rewind the tape or use a new one. (p. 21)

• STEADYSHOT is set to OFF.

m Set it to ON. (p. 54)

• The Steady Shot function does not work when the wide

mode is set to 16:9 FULL.

• FOCUS is set to MANUAL.

m Set it to AUTO. (p. 42)

• Shooting conditions are not suitable for autofocus.

m Set FOCUS to MANUAL to focus manually. (p. 42)

• The START/STOP MODE switch is set to 5SEC or

.

m Set it to

. (p. 15)

• The stereo tape is played back with HiFi SOUND set to 1

or 2 in the menu system.

m Set to STEREO in the menu system. (p. 32)

• The picture has been recorded with WIND set to ON in

the menu system.

m When there is no wind, set it to OFF. (p. 31)

• Reset the date and time. (p. 61)

Recording stops in a few seconds.

The date or time indicator
disappears.

Excessive high-pitched sound is
heard.

The fader function does not work.

The autofocusing function does not
work.

The Steady Shot function does not
activate.

The tape does not move when a
video control button is pressed.

No sound or only a low sound is
heard when playing back a tape.

The date or time indicator is flashing.

{

and 6 indicators flash and no

function except for cassette ejection
works.

The cassette cannot be removed from
the holder.

Symptom

Cause and/or Corrective Actions

• The viewfinder lens is not adjusted.

m Adjust the viewfinder lens. (p. 12)

The image on the viewfinder screen
is not clear.

Picture

Advertising
This manual is related to the following products: