Sony DCR-SX83 - Manual (Page 73)

73
Additional inf
or
ma
tion
US
The buttons on the touch panel do not
work correctly or do not work at all.
Adjust the touch panel ([CALIBRATION])
(p. 87).
The buttons on the touch panel quickly
disappear.
Set [DISPLAY SET] to [ON] (p. 68).
Dots in lines appear on the LCD screen.
This is not a malfunction. These dots are not
recorded.
Memory card
Operations using the memory card
cannot be performed.
If you use the memory card formatted on a
computer, format it again on your camcorder
(p. 66).
Images stored on the memory card
cannot be deleted.
The maximum number of images that you can
delete on the index screen at one time is 100.
You cannot delete the protected images.
The data file name is not indicated
correctly or flashes.
The file is damaged.
The file format is not supported by your
camcorder (p. 85).
Recording
Refer also to “Memory card” (p. 73).
Pressing START/STOP or PHOTO does not
record images.
The playback screen is displayed. Press MODE
to turn on the (Movie) or (Photo) lamp
(p. 14).









Your camcorder is recording the image you
have just shot on the recording media. You
cannot make new recording during this period.
The recording media is full. Delete
unnecessary images (p. 35).
Total number of movie scenes or photos
exceeds the recordable capacity of your
camcorder (p. 80, 81). Delete unnecessary
images (p. 35).
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
The temperature of your camcorder is
extremely low. Turn off your camcorder and
take it to a warm place. Leave the camcorder
there for a while, then turn on the camcorder.
Photos cannot be recorded.
You cannot record photos together with:
[SMTH SLW REC]
[ FADER]
The access lamp remains lit or flashing
even if recording was stopped.
Your camcorder is recording the scene you
have just shot on the memory card.
The imaging field looks different.
The imaging field may look different
depending on the condition of your
camcorder. This is not a malfunction.
The actual recording time for movies is
less than the expected recording time of
the recording media.
Depending on the recording conditions, the
time available for recording may be shorter, for
example when recording a fast moving object,
etc. (p. 80).
The camcorder stops operating.
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.











