Sony KDL-52Z5100 - Manual (Page 15)

Getting Started > Installing the TV > Securing the TV
Securing the TV
(Page 3 of 3)
Anchor the TV to the Wall
Use the hardware listed below (not supplied):
 Two M6 ×14 mm anchor bolts (screw into the top-most wall-mount holes located on the rear of the
TV)
 Rope or chain (attach to one M6 anchor bolt)
 Wall-anchor (attach to the wall stud) strong enough to support the weight of the TV (pass the rope
through the wall-anchor, then attach to the other M6 anchor bolt)
 Securing the TV to the stand without securing the TV and the stand to the wall provides minimum
protection against the TV toppling over. For further protection, be sure to follow the three measures
recommended.
Back to Securing the TV (Page 2 of 3) Next to Locating Inputs and Outputs
Home | Getting Started | Operating the TV | Exploring Fun Features | TV Home Menu | Other Information | Specifications
Tell us your opinion about this online reference book.
Copyright © 2009 Sony Electronics Inc. All rights reserved.
Getting Started Operating the TV Exploring Fun Features TV Home Menu Other Information Specifications