Sony PEG-N710C - Manual (Page 20)

Beam Pictures to Another CLIE Handheld
PictureGear Pocket helps you to send pictures to the PictureGear
Pocket application of another CLIE handheld using IR (Infrared)
communication.
Preparations
Turn on IR communication of both sending and receiving CLIE
handheld. Check whether the IR ports of the sending side and
receiving side are positioned properly so that communications are
possible between them. Place both CLIE handheld units to make
their IR ports facing each other. The distance between them is 10 ~
20 cm. There should be no obstruction between these units. Make
sure that PictureGear Pocket is installed in both receiving and
sending devices (e.g., your computer and CLIE handheld) to receive
and send data. The optimal data transfer distance may differ
depending on the operational relation between CLIE handheld and
your computer, or devices other than Sony. Change the distance
and try the procedure again.
Start PictureGear Pocket of the sending side CLIE handheld.
Selecting a picture
Switch PictureGear Pocket of the sending side to the selection
mode ([Preview Mode] or [List Mode]) and select a picture to be
transferred.
Reference: 2.2 "Selecting a picture in [Preview Mode]", 2.3 "Selecting a picture in [List Mode]".
Beam a picture
After switching the screen to [Full Screen Mode], tap the menu and
then click the [Beam] icon from [Icon]. PictureGear Pocket detects
the receiving side CLIE handheld and starts beaming the picture if
communications are possible.
Do not move the CLIE handheld units until the picture is transferred.
After the picture is to beam, the sending side CLIE handheld returns to the status
before the sending operation. The receiving side CLIE handheld displays the received
picture in [Full Screen Mode].
3.2
Advanced Functions of
PictureGear Pocket
3
Even if PictureGear Pocket of
the receiving side CLIE
handheld is not started when
the picture is received, the
CLIE handheld still receives
the picture. In this case, start
PictureGear Pocket after
receiving the picture. You can
display the received picture in
[Full Screen Mode].
You can transfer only one
picture at one time. You
cannot transfer multiple
pictures.
You can only use the infrared
data transfer function if
picture files are stored in the
CLIE handheld. If pictures are
stored on a "Memory Stick,"
you cannot use this function.
[Beam] icon
Search Receiving
10~20
cm
Receiving
Side
Sending
Side