Sony DCR-TRV17 - Manual (Page 62)

62
You can automatically search for the point where the recording date changes and start
playback from that point. Use a tape with cassette memory for convenience. Use the
Remote Commander for this operation.
Use this function to check where recording dates change or to edit the tape at each
recording date.
Searching for the date by using cassette memory
Before operation
•You can use this function only when playing back a tape with cassette memory
(p. 158).
•Set CM SEARCH in to ON in the menu settings (p. 100). (The default setting is
ON).
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly, until the DATE
SEARCH indicator appears.
The indicator changes as follows:
TITLE SEARCH t DATE SEARCH t PHOTO SEARCH
t PHOTO SCAN t no indicator
(3) Press . or > on the Remote Commander to select the date for playback.
Your camcorder automatically starts playback at the beginning of the selected
date.
To stop searching
Press x.
Searching a recording by date
– Date search
3
2
SEARCH
MODE
DATE SEARCH
1 SEP / 5 / 01
2 SEP / 6 / 01
3 DEC / 24 / 01
4 JAN / 1 / 02
5 FEB / 11 / 02
6 APR / 29 / 02
DATE SEARCH
1 SEP / 5 / 01
2 SEP / 6 / 01
3 DEC / 24 / 01
4 JAN / 1 / 02
5 FEB / 11 / 02
6 APR / 29 / 02