Safety instructions line voltage selection – American Audio CK 800Mp3 User Manual

Page 5

Advertising
background image

©

American Audio

®

- www.AmericanAudio.us - CK 800Mp3 Instruction Manual Page 5

I. Read Instructions - All the safety and oper-
ating instructions should be read before
you operate the system. The safety and

operating instructions should be saved
for future reference.
2. Heed Warnings - All warnings on the system
and in the operating instructions should be
adhered to.
3. Water and Moisture - The player should not
be used near water - for example, near a
bath tub, kitchen sink, laundry tub, in a wet
basement or near a swimming pool, etc.
4. Ventilation - The system should be situated
so that its location or position does not

interfere with its proper ventilation. For exam
ple, the system should not be situated on a
bed, sofa, rug, or similar surface that may
block the ventilation openings; or, placed in
a built-in installation, such as a bookcase or
cabinet that may impede the flow of air
through the ventilation openings.


5. Heat - The system should be situated away
from heat sources such as radiators, heat
registers, stoves, or other appliances (includ-
ing amplifiers) that produce heat.
6. Power Sources - The system should be con-
nected to a power supply only of the type
described in the operating instructions or as
marked on the system.
7. Servicing - The user should not attempt to

service the system beyond that described

in the operating instructions. All other ser-

vicing should be referred to qualified service

personnel. The system should be serviced

by qualified service personnel when:

A. The power-supply cord or the plug has

been damaged.

B. Objects have fallen, or liquid has been

spilled into the system.

C. The system has been exposed to rain

or water.

D. The system does not appear to operate

normally or exhibits a marked change

in performance.

SAFETY INSTRUCTIONS

Line Voltage Selection

• The desired voltage may be set with the
VOLTAGE SELECTOR switch on the rear
panel (using a flat head screw driver).
• Do not force the VOLTAGE SELECTOR
switch as this may cause damage
• If the VOLTAGE SELECTOR switch does
not move smoothly, please contact a quali-
fied service technician.

VOLTAGE SELECTOR switch

The serial and model number for this unit is
located on the rear panel. Please write down the
numbers here and retain for future reference.

Model No._____________________________

Serial No._____________________________

purchase notes:
Date of Purchase_______________________

Dealer Name__________________________

Dealer Address_________________________

__________________________________________
________________________________________

Dealer Phone__________________________

Advertising