Sony KD-32XS945 - Manual (Page 24)

23
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
VCR and Cable For best results, use this connection if:
❑
Your cable company does not require you to use a cable box.
To connect the VCR and cable
1 Connect the CATV cable to the VCR’s VHF/UHF input jack.
2 Use a coaxial cable to connect the VCR’s VHF/UHF output jack
to the TV’s CABLE jack.
3 Use an A/V cable to connect the VCR’s A/V output jacks to the
TV’s A/V input jacks.
4 Run Auto Program, as described in “Setting Up the Channel List”
on page 43.
Notes on Using This Connection
Using
S VIDEO jacks?
See page 22.
To Do This ... Do This ...
Watch the VCR Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration).
Watch cable channels Press TV/VIDEO repeatedly to select the cable input (CABLE in the
illustration).
Set up the TV remote control
to operate the VCR If you have a non-Sony VCR, you must program the remote control. See
“Programming the Remote Control” on pages 49-50.
Activate the TV remote
control to operate the VCR Press VCR/DVD FUNCTION .
Control VCR functions with
the TV remote control See “Operating a VCR” on page 59.
Label video inputs to easily
identify equipment connected
to the TV See the instructions for setting up Video Labels on page 90.
CATV cable
Coaxial cable
A/V cable
TV
VCR
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
XS.book Page 23 Monday, February 7, 2005 8:41 AM