Sony KV-32FS320 - Manual (Page 24)

17
C
onnections
Connecting a TV, VCR, and Satellite Receiver using Component Video
(Y, P
B
, P
R
)
1 Connect the coaxial cable from your satellite antenna to SATELLITE IN on the satellite
receiver.
2
Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR.
3 Using a coaxial cables (not supplied), connect the OUT jack on your VCR to the
VHF/UHF jack on your TV.
4
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite
receiver to AUDIO/VIDEO IN on your VCR.
5
Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to
AUDIO/VIDEO IN on your TV.
6
Using component video cables (not supplied), connect Y, P
B
, P
R
OUT on your satellite
receiver to Y, P
B
, P
R
IN on your TV.
7
Connect AUDIO OUT on your satellite receiver to AUDIO IN on your TV.
Using your TV with this connection
❏ Program your Sony remote control to operate your VCR or satellite receiver (see page 5).
❏ Turn on your VCR to enable your satellite receiver to work with this connection.
❏ To activate your remote, press (FUNCTION button) to operate your VCR or
(FUNCTION button) to operate your satellite receiver.
❏ Press repeatedly to switch between VCR input (VIDEO input), VHF/UHF
(local channels or unscrambled), or your cable box (cable system or scrambled channels).
1 3 4
VIDEO
L L
(MONO)
R
S VIDEO
Y
P B
P R
5
VIDEO 1 VIDEO 2
L
R
L
R
Y
B
P
P
R
VIDEO 1 VIDEO 2 VIDEO
LINE
IN
LINE
OUT
AUDIO L AUDIO P
AUDIO OUT
(VAR/FIX)
L
R
(MONO)
4
2
From
cable/
antenna
VCR
Rear of TV
3
5
7
6
1
Video (yellow)
Audio L (white)
Audio R (red)
Audio L
Audio R
Satellite
Receiver
P R (red)
P B (blue)
Y (green)
(red)
(white)