Sony PCV-RX571 - Manual (Page 14)

VAIO Digital Studio Computer QuickStart
14
Connecting the modem cable and power cords
1 Unplug your phone’s cable from the wall jack, and plug it into the Telephone
jack on the computer.
2 Plug the modem cable (supplied) into the Line jack on the computer, and
then plug the other end of the cable into the wall jack.
Connecting the phone and modem cables
Your computer has a protective sticker covering the Ethernet port located
on the rear panel. Connect only 10Base-T and 100Base-TX cables to the
Ethernet port. Using other cables or a telephone cable may result in an
electric current overload and can cause a malfunction, excessive heat or fire
in the port. For help on connecting to a network, see your network
administrator.
4
3
2
1
LINE TELEPHONE
MONITOR