Sony PCG-GR390K - Manual (Page 49)

Connecting to a Local Area Network (LAN)
49
Connecting to a Local Area Network (LAN)
You can connect your notebook to 10BASE-T and 100BASE-TX-type networks.
For the detailed settings and devices needed to connect to the network, ask your
network administrator.
Setting up your Ethernet connection
To connect to the network
1 Right-click My Network Places and select Properties.
2 Click Advanced and select Network Identification to set the computer name,
domain, workgroup, and DNS suffix. You can also use the Network
Identification Wizard.
To set the connections, bindings, and provider order
1 Right-click My Network Places and select Properties.
2 Click Advanced and select Advanced Settings. This will give you access to
Adapters and Protocol Bindings and Provider Order.
Connecting to LAN
Warning: Only connect 10BASE-T and 100BASE-TX cables to the Ethernet
port. Do not connect any other type of network cable or phone cable.
Connecting cables other than those listed above may result in an electric
current overload and could cause a malfunction, excessive heat, or fire in the
port. To connect the unit to the network, contact your network administrator.
Ethernet
port