Sony DCR-HC28 - Manual (Page 30)

30
Searching for the starting point
Make sure that the CAMERA lamp
lights up (p. 24).
[END SCH] (END SEARCH) will not
work once you eject the cassette after you
have recorded on the tape.
Touch t [PAGE1], then touch
[END SCH].
The last scene of the most recent
recording is played back for about 5
seconds, and the camcorder enters the
standby mode at the point where the last
recording has finished.
• [END SCH] will not work correctly when there
is a blank section between recorded sections on
the tape.
• This operation is also available when the
POWER switch is set to PLAY/EDIT.
You can search for the start point to start
the next recording while viewing the
pictures on the screen. The sound is not
played back during the search.
1
Touch t [PAGE1] t
[MENU].
2
Select (CAMERA SET) with
/ , then touch [EXEC].
3
Select [EDITSEARCH] with /
, then touch [EXEC].
4
Select [ON] with / ,
then touch [EXEC] t .
5
Touch and hold (to go
backward)/ (to go forward)
and release it at the point where
you want the recording to start.
Searching for the last scene of
the most recent recording (END
SEARCH)
0:00:00
SPOT
FOCUS
FOCUS
MENU FADER END
SCH EXPO–
SURE
SPOT
METER
DISP
GUIDE
PAGE1 PAGE2
60min
Touch here again to cancel the operation.
Searching manually
(EDIT SEARCH)
0:00:00 STBY 60min
EDIT FN