Sony PCV-RX460 - Manual (Page 49)

Removing, Installing, and Replacing Components 35
7 Align the module over the appropriate slot, noting the location of pin
1 on the module and pin 1 on the slot.
8
Carefully but firmly insert the edge of the module into the slot.
9
Press down firmly and evenly at both corners until the module is
fully seated.
✍
When the module is fully seated, the handles on each side are straight up and
locked into the slot on each side of the module. If the handles are not totally
straight upright, continue to press down on each side of the module until the
handles lock into place.
1 1 1 1
Press down
here
Handles
Pin 1 side
DIMM 2
DIMM 1
Memory module (DIMM)
Indicates pin 1