Sony KDL-40S504 User Manual
Page 9
G
e
tting Started
9
3
COMPONENT
IN 2
Component video provides better picture quality than the S Video and composite
video. The COMPONENT IN 2 and COMPONENT IN 1 both accommodate for
video formats of 1080p, 1080i, 720p, 480p, and 480i as labeled.
Audio connection is required for the COMPONENT IN ports, connect audio (L/R).
4
AUDIO OUT
(FIX)
Connects to the left and right audio input jacks of your audio equipment. You can
use these outputs to listen to your TV’s audio through your stereo system.
5
HDMI IN 1/2/3
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-
digital audio/video interface between this TV and any HDMI-equipped audio/video
equipment, such as a set-top box, DVD player, Blu-ray Disc, and A/V receiver.
HDMI supports enhanced, or high-definition video, plus digital audio.
Be sure to use only an HDMI cable that bears the HDMI logo.
If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to any
HDMI IN (with DVI-to-HDMI cable or adapter) jack, and connect the audio jack to
the AUDIO IN (L/R) jacks below the HDMI IN 1.
6
DIGITAL AUDIO
OUT (OPTICAL)
Connects to the optical audio input of a digital audio equipment that is PCM optical
compatible.
7
CABLE/
ANTENNA
RF input that connects to your Cable or over-the-air antenna.
8
PC IN
(RGB/AUDIO)
Connects to a personal computer’s video and audio output connector. Can also be
connected to other analog RGB equipment.
For some Apple Macintosh computers, it may be necessary to use an adapter (not
supplied). If an adapter is used, connect the adapter to the computer before
connecting the HD15-HD15 cable.
You may need to adjust the TV settings or your PC’s resolution and timing, see page
19 to setup your PC to this TV.
9
VIDEO IN 2
S VIDEO
VIDEO/
L (MONO)-
AUDIO-R
Connects to the composite video and audio output jacks on your A/V equipment
such as a DVD player or other video equipment. VIDEO IN 2 input is located on the
left side panel of the TV.
Connects to the S VIDEO output jack of your DVD or other video equipment that
has S VIDEO which provides better picture quality than composite video. The S
VIDEO does not provide sound; you will need to connect the audio cables.
Item
Description
Be sure to refer to the Quick Setup Guide for:
• High quality picture performances
• Combination of equipment connections
• Cable types to use for connection
To view 480p, 720p, 1080i, and 1080p formats, an HDMI or Component video (YP
B
P
R
) is
necessary. Connect your equipment properly and playback the video with capable equipment. This
TV displays all picture format types in a resolution of 1,920 dots × 1,080 lines.