Sony PRS-950SC - Manual (Page 3)

4-257-320-11(2) PRS-950
 
Meet your Reader
Stylus
Power
switch Slide to the right and
release quickly
USB connector
WIRELESS switch
Charge/Busy indicator
Ready
Before you get started, let’s ensure your Reader is ready. Charge
your Reader with the supplied AC adapter and then slide the
POWER switch. Follow the on-screen instructions to finish the
initial setup.
To USB connector
To AC outlet
USB cable
AC adapter
(PRSA-AC1)
The Reader requires about  1/ hours to fully charge (lights up red
while charging), after which the charge/busy indicator goes off.