Sony ICD-ST25VTP - Manual (Page 48)

48 GB
Playing Back a Message at a Desired Time with an
Alarm (continued)
4
Select the alarm time.
1 Press the jog lever up or down
(>/.) to select the hour
digits, and press the jog lever
(x•B).
The minute digit will flash.
2 Press the jog lever up or down
(>/.) to select the minute
digits, and press the jog lever
(x•B).
5
Select the alarm playback.
Press the jog lever up or down
(>/.) to select the alarm
sound either from “B-PLAY” (for
starting playback after the alarm) or
“B-ONLY” (for only the alarm).
6
Press the jog lever (x•B).
The setting is finished.
7
Press the jog lever toward MENU
to exit the menu mode.
The normal display appears.
“,” is displayed when the message
having an alarm setting is selected.
When the set date and time comes
At the set time, the alarm will sound for about 10 seconds and the selected
message will be played back (If you have selected “B-ONLY“ in step 5,
only the alarm will sound).
During alarm playback, “ALARM” will flash in the display window.
When the playback ends, the unit will stop automatically at the beginning
of that message.