Waking up to music – Sony DHC-FL7D User Manual

Page 56

Advertising
background image

56

GB

6

Set the time to stop playback following
step 5.

7

Press

.

or

>

repeatedly until the

music source you want appears.

The indications change as follows:

t TUNER y DVD PLAY T

t TAPE PLAY T

8

Press ENTER on the remote.

The type of timer (“DAILY TIMER”),
followed by the start time, stop time and the
music source, appears, then the original
display appears.

9

Turn off the power.

To

Check the setting

Change the setting

Cancel the Daily
Timer

Notes

• If the power is on at the preset time, the Daily

Timer does not work.

• When you use the Sleep Timer, the Daily Timer

will not turn on the system until the Sleep Timer
turns it off.

• The power turns on 15 seconds before the preset

time.

• You cannot activate the Daily timer and the Timer-

recording simultaneously.

Do this

Press CLOCK/TIMER
SELECT on the remote and
press . or > repeatedly
to select “DAILY SELECT?”,
then press ENTER on the
remote.

Start over from step 1.

Press CLOCK/TIMER
SELECT on the remote and
press . or > repeatedly
to select “TIMER OFF?”, then
press ENTER on the remote.

Waking up to music

— Daily Timer

You can wake up to music at a preset time
every day. Make sure you have set the clock
(see “Setting the clock” on page 16).

1

Prepare the music source you want to
play.

• DVD/VIDEO CD/CD/Super Audio CD/

MP3: Load a disc. To start from a
specific track, make a program (see
“Creating your own program” on page
22).

• Tape: Load a tape with the side you

want to play facing forward.

• Radio: Tune in the preset station you

want (see “Listening to the radio” on
page 42).

2

Adjust the volume.

3

Press CLOCK/TIMER SET on the
remote.

“SET” appears.

4

Press

.

or

>

repeatedly to select

“DAILY SET?”, then press ENTER on
the remote.

“ON” appears and the hour indication
flashes.

5

Set the time to start playback.

Press . or > repeatedly to set the
hour, then press ENTER on the remote.

The minute indication flashes.

Press . or > repeatedly to set the
minutes, then press ENTER on the remote.

The hour indication flashes again.

Advertising
This manual is related to the following products: