Arrow Plastic SA8662-A - Manual (Page 29)

29
Step 16
B29
● Parts Needed For ●
Roof Trim
● ● ● ● ● 8482 Side Roof Trim (2)
1
Attach the side roof trim to the
lower end of the roof panels on each
side of the building using screws at
each panel overlap.
2
Using your thumb and index fin-
ger, overbend the bottom flange of
the side roof trim and roof panel rib at
the corner inward enough so the right
and left roof trim caps fit onto right and
left corners.
3
Fasten the roof trim caps to the
side trim using a screw.
4
Fasten the roof panel ribs, peak
caps and ridge cap together using
bolts and nuts.
Tuck Flange
Inward to Fit
Inside of
Roof Trim Cap
8482
STEP
4
STEP
1
STEP
2
STEP
3
Peak Cap
Roof Trim Cap
Side Roof Trim
8482