Sony ICD-UX512BLK - Manual (Page 107)

107 GB
Tr
o
ub
les
h
o
ot
ing
The IC recorder does not
operate. • You may have formatted the memory of the IC recorder using the
computer. Use the IC recorder formatting function to format the
memory (page 79).
The IC recorder does not
operate, even if you press
any button. • The battery is weak (page 13).
• The power to the IC recorder is off. Slide the HOLD/POWER
switch in the direction of “POWER” for more than 1 second
(page 14).
• The HOLD function is activated. Slide the HOLD/POWER switch
in the center direction (page 10).
No sound comes from the
speaker. • The volume is turned down completely (page 24).
• Headphones are plugged in (page 45).
Sound comes from the
speaker even when the
headphones are plugged in. • If you plug in the headphones not securely during playback, the
sound may come from the speaker. Unplug the headphones, and
then insert them securely.
The operation indicator does
not light. • “LED” is set to “OFF.” Display the menu and set “LED” to “ON”
(page 76).
The “Memory Full”
animation is displayed and
you cannot start recording. • The memory is full. Erase some of the files (page 28) or erase all
the files after you store them on the other memory media or on
your computer.
The “File Full” animation is
displayed and you cannot
operate the IC recorder. • 199 files have been recorded in the selected folder ( ) or 4,074
files (when there are 21 folders) in total have been recorded.
Therefore you cannot record another file, or move a file. Erase
some of the files (page 28) or erase all the files after you store
them on the other memory media or on your computer.
You cannot record a file. • The remaining memory capacity is insufficient.
• You cannot record a file when you select a folder in the playback-
only area (the (Music) tab and the (Podcast) tab).
Symptom Remedy