Sony KV-30XBR910 - Manual (Page 97)

96
O
ther
Inf
o
SETU
P
Oth
e
r I
n
fo
SETU
P
S
E
TU
P
SETU
P
Remote Control
Channels
Problem Possible Remedies
Remote control
does not operate ❏ The batteries could be weak. Replace the batteries.
❏ Check the orientation of the batteries.
❏ Press the TV FUNCTION button. You may have inadvertently pressed the
SAT/CABLE FUNCTION button, which changes the remote control to SAT or
CABLE mode.
❏ Make sure the TV’s power cord is connected securely to the wall outlet.
❏ Locate the TV at least 3-4 feet away from fluorescent lights.
Cannot change channels
with the remote control ❏ If you are using the TV to change channels, first press the TV FUNCTION
button.
❏ If you are using another device to change channels, be sure you have not
inadvertently switched your TV from the channel 3 or 4 setting. Use the
Channel Fix option to “fix” the channel based on the hookup you used (see
page 84).
❏ If you are using another device to change channels, be sure to press the
FUNCTION button for that device. For example, if you are using your cable box
to change channels, be sure to press the SAT/CABLE FUNCTION button.
Remote control
does not operate non-Sony
video equipment ❏ If you replaced the batteries to the remote recently, the code numbers for
the video equipment may need to be reset.
❏ There may be more than one code for the equipment that you are
attempting to operate.
❏ There is a possibility that some non-Sony equipment cannot be operated by
your Sony TV remote.You may need to use the equipment’s original
remote control.
Problem Possible Remedies
Cannot receive upper
channels (UHF) when
using an antenna ❏ Change the Cable option to Off (see page 84).
❏ Use Auto Program in the Channel Menu to add receivable channels that are
not presently in the TV’s memory (see page 84).
TV is fixed to one channel ❏ Use Auto Program in the Channel Menu to add receivable channels that are
not presently in the TV’s memory (see page 84).
❏ Check your Channel Fix settings (see page 84).
Cannot receive any
channels when using
cable TV ❏ Use Auto Program in the Channel Menu to add receivable channels that are
not presently in the TV’s memory (see page 84).
❏ Make sure the Cable option is set to On in the Channel Menu (see page 84).
Cannot receive or select
channels ❏ Use Auto Program in the Channel Menu to add receivable TV channels that
are not presently in TV memory (see page 84).
34XBR.book Page 96 Monday, May 19, 2003 8:44 AM