Sony DVP-NW50 - Manual (Page 23)

Chapter 1 Getting Started
23
Setup 4: Setting up “Server Setup, powered by DiXiM” (continued)
Continue to the next page l
2 Enter a name of the Media Server in the “Media
Server Name” text box.
The name of the Media Server is automatically
displayed in the “Media Server Name” text box if you
set a name for the Media Server when you installed the
“Server Setup, powered by DiXiM.”
If you do not provide a name for the Media Server, the
default name is “Media Server for In-Wall Unit.”
3 Click “OK” or “Apply.”
4
Restart your computer.
Prohibiting a Unit from accessing
contents
1 Click the “Security” tab on the “Server Setup,
powered by DiXiM” window.
Whether a Unit can access contents stored on the
computer is determined by which list the Unit is on.
Only Units on the “Permitted List” can access contents
on the computer.
Units on the ”Denied List” cannot access contents on the
computer.
2 Select the Unit that you want to prohibit from
accessing content from the “Permitted List.”
“Permitted list”
3 Click “ P Deny.”
The selected Unit moves to the “Denied List.”
4
Click “OK” or “Apply” to prohibit the selected Unit
from accessing content stored on the computer.
To setting up access privileges for contents
1 Select the Unit that you want to access content from
the “Denied List.”
2 Click “Permit p .”
The “About Security” window appears.
3 Click “Yes” to confirm that you want to grant access
privileges to the selected Unit.
The selected Unit moves to the “Permitted List.”
4 Click “OK” or “Apply” to allow the selected Unit to
access content stored on the computer.