Sony XAV-701HD - Manual (Page 48)

48
Tip: To change the number of seconds or the warning sound, tap Alert settings in the
Safety Cameras menu.
Changing the way you are warned
Safety Camera Symbols
Safety cameras are shown as symbols on the Driving View.
When you approach an area where an alert is located, you see a symbol and a warning
sound is played.
You can change both the warning sound and the number of seconds that the warning is
issued before reaching the alert.
Alert settings
To change the way your TomTom navigation module warns you about
safety cameras, tap the Alert settings button.
You can then set how close you want to be to a safety camera before
you are warned and what type of sound will be played.
For example, to change the sound that is played when you approach a
fixed safety camera, do the following:
1. Tap Services in the Main Menu.
2. Tap Safety Cameras.
3. Tap Alert settings.
A list of safety camera types is displayed. A speaker is shown next
to the safety camera types that have been set for an alert.
4. Tap Fixed cameras.
5. Tap NO to avoid removing the fixed safety camera alerts.
6. Enter the time in seconds for when a warning is given before you
reach a camera. Then tap OK.
7. Tap the sound you want to be used for the warning.
Tips : To switch off warning sounds for a camera type, tap Silence in
step 7 above. You still see a warning in the Driving View if you switch
off the warning sound.
8. Tap YES to save your changes.
Fixed safety camera
Temporary safety camera
Red light camera