Self-diagnosis display, Cyber-shot user guide – Sony DSC-RX100M2 User Manual
Page 247
Search
Precautions / About this camera
Top page > Troubleshooting > Warning indicators and messages > Self-diagnosis display
Self-diagnosis display
If a code starting with a letter of the alphabet appears, the self-diagnosis function on the camera is
working. The last two digits (indicated by
) will differ depending on the state of the camera.
If you cannot solve the problem even after trying the following corrective actions a few times, the camera
may need repair.
Contact your dealer or local authorized service facility.
C:32:
There is trouble with the camera’s hardware. Turn the power off and on again.
C:13:
The camera cannot read or write data on the memory card. Try turning off and on the camera again,
or taking out and inserting the memory card several times.
An unformatted memory card is inserted. Format the memory card.
The inserted memory card cannot be used with the camera, or the data is damaged. Insert a new
memory card.
E:61:
E:62:
E:91:
A camera malfunction has occurred. Initialize the camera, then turn the power on again.
E:94:
There is a malfunction when writing or deleting data. Repair is required. Contact your dealer or local
authorized service facility. Be prepared to give all numbers in the error code beginning from the E.
Copyright 2013 Sony Corporation
238