Sony VPL-VW1100ES - Manual (Page 28)

28
Using “ImageDirector3” to Adjust the Picture
Quality
By using the “ImageDirector3,” you can make the desired gamma correction from a
computer connected to the unit. Connect the REMOTE connector of the unit with a
computer and start-up “ImageDirector3” on the computer.
For details on how to use “ImageDirector3,” refer to the Help in “ImageDirector3.”
• You need to install the “ImageDirector3” on a computer beforehand. “ImageDirector3” can be
downloaded from the Sony website.
http://esupport.sony.com/US/p/select-system.pl
http://www.pro.sony.eu/pro/article/projectors-home-cinema-article
• When connecting the REMOTE or LAN connector to a computer, connect with both the computer
and unit turned off.
• You can perform adjustment with “ImageDirector3” when “Gamma Correction” in the Picture
menu ( 1 page 35) is set to 1.8, 2.0, 2.1, 2.2, 2.4, or 2.6. Adjustment is not possible when it
is set to Gamma 7 to 10 and Off.
• Before using “ImageDirector3,” use the Picture menu to set “Gamma Correction” to 1.8, 2.0,
2.1, 2.2, 2.4, or 2.6. In “ImageDirector3”, the display is Gamma 1, Gamma 2, Gamma 3, Gamma
4, Gamma 5 and Gamma 6 respectively.
• If you use “ImageDirector3” while a 3D video image is displayed or a 3D signal is input, the image
may be distorted.
Notes