Sony KV-36HS510 - Manual (Page 32)

31
SETU
P
Set
up
S
E
TU
P
SETU
P
S
E
TU
P
SETU
P
Notes on Using This Connection
To Do This ... Do This ...
Watch the satellite receiver Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration).
The VCR may need to be turned on and set to the satellite receiver input.
Watch the VCR Press TV/VIDEO repeatedly to select the input to which the VCR is connected
(VIDEO 1 in the illustration).
Set up the TV remote control
to operate the satellite
receiver or VCR If you have a non-Sony VCR or satellite receiver, you must program the
remote control. See “Programming the Remote Control” on pages 43-44.
Activate the TV remote
control to operate the satellite
receiver or VCR For the satellite receiver, press SAT/CABLE FUNCTION. For the VCR, set the A/V
slide switch to the position you programmed for the VCR. Then press
VCR/DVD FUNCTION .
Control satellite receiver and
VCR functions with the TV
remote control See “Operating a Satellite Receiver” on page 60 and “Operating a VCR” on
page 60.
Label video inputs to easily
identify equipment connected
to the TV See the instructions for setting up Video Labels on pages 74-75.
32_36HS.book Page 31 Friday, February 7, 2003 11:15 AM