Sony HDR-CX290 - Manual (Page 47)

You can change the on-screen displays to show messages in a specified language.
Select
[Setup] [ General Settings] [Language Setting] a desired language.
To turn off the power
Close the LCD screen or press the POWER button (models with the POWER button).
To adjust the angle of the LCD screen
First open the LCD panel 90 degrees to the camcorder ( ), and then adjust the angle ( ).
Notes
The recording date and time are recorded automatically on the recording media. They are not
displayed during recording. However, you can check them as [Data Code] during playback. To
display them, select
[Setup] [ Playback Settings] [Data Code]
[Date/Time].
Related topics
Information on your camcorder model:
Model Information
[ Power On By LCD (HDR-CX320/ CX320E/ CX380/ CX380E/ CX390E/ PJ320E/ PJ380/ PJ380E/
PJ390E) ]
To set the date and time again: [ Date & Time Setting ]
To calibrate the touch panel: [ Calibration (HDR-CX320/ CX320E/ CX380/ CX380E/ CX390E/ PJ320E/
PJ380/ PJ380E/ PJ390E) ]
Back to top
Copyright 2013 Sony Corporation
40