Sony PCWA-C500 - Manual (Page 2)

Step 3
Install the supplied Wireless Panel software
Note
Log on to Windows with the computer administrator user account.
Before Installing ...
• Finish installing the Wireless LAN PC Card driver (refer to Step 2).
• Close any running programs.
1 Double click Setup.exe that was copied from the 5GHzWirelessLAN folder on
the supplied CD-ROM.
Depending on computer settings, Setup.exe may be displayed as just Setup. If several files with the
same name appear in the folder, double click the one with the following icon.
2 Click Next.
3 Confirm the contents of the displayed License Agreement, and click Yes.
Choose Destination Location dialog box appears.
4 Click Next.
Wireless Panel installation begins.
5 Click Finish.
The Wireless Panel launches.
Proceed to Step 4.
Step 4
Configure the appropriate computer communications settings
1 Double-click the Wireless Panel icon (Received Signal Level indicator) on the
task bar.
The Wireless Panel main screen appears.
z Hint
For details on the Received Signal Level indicator, see “Viewing the Communication Status” in the
Operating Instructions.
2 Click the Network List button on the Wireless Panel.
The Network Connections window appears.
3 When the computer is connected to a wireless network:
Right-click “Wireless Connection *” (where the asterisk represents a number. This number varies
according to conditions) and select View Available Wireless Networks from the shortcut menu.
The Connect to Wireless Network dialog box appears.
When the computer is not connected to a wireless network:
(In this case, “Wireless Network connection *” in the Network Connections dialog box is indicated with
an “X”.)
Double-click “Wireless Connection *” (where the asterisk represents a number. This number varies
according to conditions).
The Connect to Wireless Network dialog box appears.
Subsequent opperation differs according to the connection mode.
For Access Point Network connection mode
The example in this description assumes the Access Point has its factory default settings. If the Access
Point settings have been altered, change the new settings to match.
1 From Available networks list in Connect to Wireless Network, click the
network that you want to connect to.
2 If the WEP function is enabled for the Access Point, enter the WEP key in
the Network key field.
z Hint
WEP is an encryption function that prevents unauthorized access to wireless networks, and the WEP key
is a password required to decode encrypted transmissions. When connecting to an existing Access Point,
obtain the key value from the administrator of the network.
3 Click Connect.
Communication with the Access Point is established.
If you are not going to change the Access Point settings, this completes all the necessary settings. If you
want to change the Access Point settings, follow the instructions below.
Note
To use Access Point to connect to the Internet, you must change the Access Point factory default
settings.
4 Double-click the Wireless Panel icon (Received Signal Level indicator) on the
taskbar.
The Wireless Panel main screen appears.
5 Click AP Setting.
Your web browser starts and displays the Access Point setup page.
Proceed to Step 5.
For Peer to Peer Network connection mode
This description presumes a peer to peer network of two computers.
1 Click Advanced.
The Wireless Network Connection Properties dialog box appears.
2 Click the Wireless Networks tab.
3 Click Add.
The Wireless Network Properties dialog box appears.
4 Enter a Network name (SSID) for this network (up to 32 characters, and may
include symbols).
For example, you could enter “peer-to-peer”.
5 Select “Data encryption (WEP enabled)”, and clear “The key is provided for
me automatically.”
6 Enter five characters (which may include symbols) in the Network key field.
“ASCII characters” is displayed as the Key format, and “40 bits (5 characters)” as the Key length.
7 Select “This is a computer-to-computer (ad hoc) network; wireless access
points are not used”, and click OK.
You are returned to the Wireless Network Connection Properties dialog box.
8 Click OK.
9 Perform steps 1 through 8 again on the other computer.
Settings for the Peer to Peer Network connection mode are completed.
Step 5 (Access Point Network connection mode only)
Configure the appropriate Access Point communication
settings. If connecting to the Internet via the Access Point, also
configure the Access Point Internet connection settings.
Refer to the Access Point Quick Start Guide for details.
Step 6 (Access Point Network connection mode only)
Set the computer communications settings to match the
settings configured in Step 5
Note
Log on to Windows with the computer administrator user account.
1 Right-click the Wireless Network Connection icon on the taskbar and select
View Available Wireless Networks from the shortcut menu.
The Connect to Wireless Network dialog box appears.
2 Select the Access Point from Available networks.
3 If the WEP function of the Access Point is enabled, enter the WEP key in
Network key field.
4 Click Connect.
Connection to the Access Point is established.
Step 7 (Access Point Network connection mode only)
Connect the Access Point to the DSL modem, cable modem,
or ISDN router
Refer to the Access Point Quick Start Guide for details.
Getting help
This section describes how to get help and support from Sony.
About Sony’s Support Options
Sony provides several support options for your Wireless LAN PC Card. When you have questions
about your Wireless LAN PC Card and its related software, check these options for answers:
❒ This guide explains how to install the Wireless LAN PC Card, Wireless LAN PC Card driver,
and the Wireless Panel utility software provided.
❒ Operating Instructions explains how to use your Wireless LAN PC Card.
❒ Wireless Panel Online Help explains how to use the Wireless Panel utility software .
❒ The Sony Wireless LAN PC Card support Web site
http://www.sony.com/wirelesslansupport/
provides the latest information on your
Wireless LAN PC Card.
❒ The Sony e-mail support service answers your questions by electronic mail. Just send
your question in an e-mail message and a customer service representative will reply. To send a
question to Sony e-mail support, fill out the e-mail form at
http://www.sony.com/wirelesslansupport/
❒ The Sony fax-back service provides you with answers to commonly asked questions. You
can use this automated service to request a list of available topics and then select the topics you
want to receive. To contact the Sony fax-back service, call
1-877-760-7669 .
❒ The Sony Customer Information Services Center offers information about your Access
Point, Wireless LAN PC Card, and other Sony products that work with your computer. To
contact the Sony Customer Information Services Center, call
1-877-760-7669.
Open 24 hours/day, 7 days/week .