ATEN ALTUSCN KH1516I - Manual (Page 40)

KH1508i / KH1516i User Manual
28
(Continued from previous page.)
Setting Function
ACTIVATE
BEEPER Choices are Y (for Yes), or N (for No). When activated, the beeper
sounds whenever a Port is changed, when activating the Auto Scan
function (see F7 SCAN, page 32), or an invalid entry is made on an
OSD menu. The default is Y (activated).
SET QUICK
VIEW PORTS This function lets the Administrator select which Ports to include as
Quick View ports.
Š
To select/deselect a port as a Quick View Port, use the Navigation
Keys to move the highlight bar to it, then press the [Spacebar].
Š
When a port has been selected as a Quick View Port, an arrowhead
displays in the QV column of the LIST on the Main Screen to
indicate so. When a port is deselected, the arrowhead disappears.
Š
If one of the Quick View options is chosen for the LIST view (see F2
LIST, page 25), only a Port that has been selected here will display
on the List.
Š
If one of the Quick View options is chosen for Auto Scanning (see
SCAN/SKIP MODE, page 27), only a Port that has been selected
here will be Auto Scanned.
The default is for no ports to be selected.