ATEN ALTUSCN KH1516I - Manual (Page 117)

Chapter 7. The User Interface
105
Port Names
To help remember which computer is attached to a particular port, every port
can be given a name. This field allows the Administrator to create, modify, or
delete port names. To configure a port name:
1. Click once on the port you want to edit, then either press [F2], or click
again on the highlight bar.
Note: This is not a double click. It involves two separate clicks. A double
click will switch you to the device attached to the port.
After a second or two, the bar changes to a text input box:
2. Key in the new Port Name, or modify/delete the old one.