ATEN ALTUSCN KH1516I - Manual (Page 13)

1
Chapter 1
Introduction
Overview
The KH1508i / KH1516i KVM Switches are control units that allow access to
multiple computers from a single KVM (keyboard, monitor, and mouse)
console.
A single KH1508i / KH1516i can control up to 8 / 16 computers. As many as
15 additional KH1508 / KH1516 switches can be daisy chained from the
original unit, so that up to 256 computers can all be controlled from the original
KVM console.
Note: Aten ACS1208 / ACS1216 switches can also be installed on a KH1508i
/ KH1516i daisy chain.
Since the KH1508i / KH1516i uses TCP/IP for its communications protocol, it
can be accessed from any computer on the Net - whether that computer is
located down the hall, down the street, or half-way around the world.
In addition to TCP/IP connectivity, the KH1508i / KH1516i provides KVM
ports for a locally attached PS/2 console – allowing access and control from the
data center as well as over the Net. The switches utilize a single shared bus
implementation – although they support local and remote login at the same
time, they do not support independent operation. If a local user logs in while a
remote user has already opened a session, the local user sees the same screen
that the remote user is working on.
Local
Over the
NET TM