ATEN ALTUSCN KH1516I - Manual (Page 24)

KH1508i / KH1516i User Manual
12
Single Station Installation
In a Single Stage installation, there are no additional KVM switches daisy
chained down from the KH1508i / KH1516i. To set up a single stage
installation, refer to the installation diagrams starting on page 13 (the numbers
in the diagram correspond with the numbers of the instruction steps), and do
the following:
1. Plug your Local Console’s keyboard, monitor, and mouse into the unit’s
Console Ports. Each port is color coded and marked with an appropriate
icon to identify itself.
Note: The KH1508i / KH1516i does not support distances that exceed
20m between itself and the local monitor.
2. Use Cat. 5 cable to connect any available KVM port to a KVM Adapter
Cable that is appropriate for the computer you are installing (see KVM
Adapter Cables, page 5 for details).
Note: The KH1508i / KH1516i does not support distances that exceed
40m between itself and the KVM Adapter Cable.
3. Connect the KVM Adapter Cable to the computer.
Plug the connectors on the KVM Adapter Cable into the appropriate ports
of the computer you are installing. (See KVM Adapter Cable Installation
Diagrams, page 14 for connection examples.)
4. Plug the LAN or WAN cable into the KH1508i / KH1516i’s LAN port.
5. Plug the female end of the power cord into the KH1508i / KH1516i's
Power Socket; plug the male end into an AC power source.
6. Turn on the power to the KH1508i / KH1516i.
After the KH1508i / KH1516i is powered up, you can turn on the computers.