ATEN ALTUSCN KH1516I - Manual (Page 43)

Chapter 4. Local Console Operation
31
F5 SKP
This function enables you to easily skip backward or forward, switching the
console focus from the currently active KVM Port to the previous or next
available one.
Š The selection of computers to be available for Skip Mode switching is
made with the Scan/Skip Mode setting under the F3 SET function
(see page 26).
Š When you are in Skip Mode, press:
Note: When you Skip, you only Skip to the previous or next available
computer that is in the Scan/Skip Mode selection (see page 27).
Š If a Port has been selected for Scan/Skip Mode, when the focus switches to
that port a Left/Right Triangle symbol appears before its Port ID Display
to indicate so.
Š While Skip Mode is in effect, the console will not function normally. You
must exit Skip Mode in order to regain control of the console.
Š To exit Skip Mode, press the [Spacebar] or [Esc].
←
To skip from the current port to the previous port in the List.
→
To skip from the current port to the next port in the List.
↑
To skip from the current port to the last port of the previous station
in the List.
↓
To skip from the current port to the first port of the next station in
the List.