ATEN ALTUSCN KH1516I - Manual (Page 53)

Chapter 4. Local Console Operation
41
4. Shut down all of the computers - but not the Stations - on your KVM
installation.
5. From your KVM switch console, bring up the OSD (see page 21) and
select the F4ADM function.
6. Scroll down to FIRMWARE UPGRADE. Press [Enter], then press [Y] to
invoke Firmware Upgrade Mode (see page 30) For your reference, the
current firmware upgrade version displays on the screen.
Starting the Upgrade
To upgrade your firmware:
1. Run the downloaded Firmware Upgrade Package file - either by double
clicking the file icon, or by opening a command line and keying in the full
path to it.
The Firmware Upgrade Utility Welcome screen appears:
2. Read and Agree to the License Agreement (enable the I Agree radio
button).
(Continues on next page.)