ATEN ALTUSCN KH1516I - Manual (Page 58)

KH1508i / KH1516i User Manual
46
Adapter Cable Upgrade
The firmware for the KA9520, KA9570, and KA9130 KVM Adapter Cables
can also be upgraded. Check the web site regularly to find the latest packages
and information relating to them:
Before You Begin
To prepare for the firmware upgrade, do the following:
1. From a computer that is not part of your KVM installation go to our
Internet support site and choose the model name that relates to your device
to get a list of available Firmware Upgrade Packages.
2. Choose the Firmware Upgrade Package you want to install (usually the
most recent), and download it to your computer.
Note: The upgrade files for the three adapter cables aren’t packaged
separately. A single upgrade package provides the upgrade files for
all of them.
3. Use the Firmware Upgrade Cable (provided with this unit), to connect a
COM port on your computer to the Firmware Upgrade Port of the
KH1508i / KH1516i.
4. From your KVM switch console, bring up the OSD (see page 21) and
select the F4ADM function.
5. Scroll down to ADAPTER UPGRADE. Press [Enter].
6. In the screen that comes up, press [Y] to invoke Upgrade Mode.
Note: 1. A message appears reminding you to connect an adapter cable.
The upgrade takes place via the Cat 5 cable that connects the
adapter cable to the KVM switch, however, so there is no need to
connect a separate firmware upgrade cable. If all the adapter
cables you want to upgrade have already been connected to the
switch, simply ignore the message.
2. All the connected adapter cables get upgraded during a single
upgrade session.