ATEN ALTUSCN KH1516I - Manual (Page 81)

Chapter 6. Administration and Configuration
69
Service Configuration
The Service Configuration dialog is composed of two main panels: Access Port
and Log Server:
Access Port
As a security measure, if a firewall is being used, the Administrator can specify
the port numbers that the firewall will allow, and set the firewall accordingly.
Users must specify the port number when they log in to the KH1508i /
KH1516i. If an invalid port number (or no port number) is specified, the
KH1508i / KH1516i will not be found.
An explanation of the fields is given in the table below:
Note: 1. If there is no firewall (on an Intranet, for example), it doesn’t matter
what these numbers are set to, since they have no effect.
2. The access ports cannot have the same value. You must set a different
value for each one.
Field Explanation
Program This is the port number that must be specified when connecting
from the Windows Client software program. Valid entries are
from 1024–65535. The default is 9000.
HTTP The port number for a browser login. The default is 80.
HTTPS The port number for a secure browser login. The default is 443.