ATEN ALTUSCN KH1516I - Manual (Page 88)

KH1508i / KH1516i User Manual
76
LDAP Settings
To allow authentication and authorization for the KH1508i / KH1516i via
LDAP / LDAPS, set the parameters as follows:
1. Check the box to enable LDAP / LDAPS authentication and authorization.
2. Click a radio button to specify whether to use LDAP or LDAPS
3. Fill in the IP address and port number for the LDAP or LDAPS server. For
LDAP, the default port number is 389; for LDAPS, the default port
number is 636.
4. Set the time in seconds that the KH1508i / KH1516i waits for an LDAP or
LDAPS server reply before it times out.
5. Consult the LDAP / LDAPS administrator to ascertain the appropriate
entry for this field. For example, the entry might look like this:
ou=kh1516i,dc=aten,dc=com
6. Key in the LDAP administrator’s username.
7. Key in the LDAP administrator’s password.
Set the distinguished name of the search base. This is the domain name where
the search starts for user names.