ATEN ALTUSCN KH1516I - Manual (Page 93)

Chapter 6. Administration and Configuration
81
I/O Modules
Clicking the Attributes button in the I/O Modules section brings up a dialog
box that allows you to set attribute parameters for each of the ports:
Note: KVM Adapter Cables are referred to as I/O Modules in these dialog
boxes.
The port numbers are listed in the column on the left. The port's attributes are
shown to its right.
Š The first column to the right of the port numbers specifies the operating
system that the computer on the connected port is using. Choices are PC,
Mac, Sun, and Other. The default is PC.
Š The next column specifies the OS language that the computer on the
connected port is using. Choices are US English, UK English, French,
German, Korean, Japanese, Spanish, and Traditional Chinese. The default
is US English.
Š The third column specifies the length of the Cat5 cable that is used to
connect the computer to the port. Choices are Short (less than 25m),
Medium (20–40m), and Long (greater than 35m). The default is Short.
Š To change an attribute:
Š Click on it to cycle through the choices.
Š Navigate to it with the Arrow Keys and press + or - to cycle through
the choices. Hold down [Shift] while you press + or - to have all the
ports on the Station cycle through the attribute choices in unison.