Sony NW-E103PS - Manual (Page 29)

Adjusting the settings of your Network Walkman
29
To cancel the Menu mode
Select [RETURN] in the menu screen or press the
MENU button.
Note
If AVLS (page 27) is set, the actual volume may be
lower than the settings.
Releasing AVLS returns the volume to the preset
level.
Switching to the manual
mode
1
Press the MENU button.
The menu screen is displayed.
2
Press the .–/+> button to
select “VOL: SET>.”
V O L : S E T >
3
Press the Nx button to confirm.
“SET>” blinks.
4
Press the .–/+> button to
select “MAN.”
V O L : M A N
5
Press the Nx button to confirm.
6
Press the MENU button.
The display returns to the normal screen.
With this setting, you can adjust the
volume level by pressing the VOLUME
+/– button.
3
Press the Nx button to confirm.
“MAN” blinks.
4
Press the .–/+> button to
select “SET>.”
V O L : S E T >
5
Press the Nx button to confirm.
“VOL LO xx”* blinks.
* “xx” is the volume level.
V O L L O x x
6
Set volume levels of three preset
levels: LO, MID, or HI.
1 Press the VOLUME +/– button to set
the volume level of the LO preset.
2 Press the .–/+> button to
select “VOL MID xx,” and then
press the VOLUME +/– button to set
the volume level of the MID preset.
3 Press the .–/+> button to
select “VOL HI xx,” and then press
the VOLUME +/– button to set the
volume level of the HI preset.
7
Press the Nx button to confirm.
8
Press the MENU button.
The display returns to the normal screen.
With these settings, you can adjust the
volume level to any of three preset
levels: LO, MID, or HI.