Sony DSC-P1 - Manual (Page 8)

8
Preparing the power supply
Installing the battery pack
Your camera operates only with the “InfoLITHIUM” NP-FS11 battery pack* (S
series). You cannot use any other battery pack.
To remove the battery pack
Open the battery/“Memory Stick” cover. Slide the battery eject lever upward,
and remove the battery pack.
Be careful not to drop the battery pack when removing it.
* What is “InfoLITHIUM”?
“InfoLITHIUM” is a lithium ion battery pack which can exchange information such as battery
consumption with compatible video equipment. This unit is compatible with the
“InfoLITHIUM” battery pack (S series). “InfoLITHIUM” S series battery packs have the
mark. “InfoLITHIUM” is a trademark of Sony Corporation.
1
Open the battery/“Memory Stick” cover.
Slide the cover in the direction of the arrow.
2
Install the battery pack.
Insert the battery pack with the
B mark facing toward the battery compartment
as illustrated.
3
Close the battery/“Memory Stick” cover.
Battery eject lever