Sony HDR-CX7 - Manual (Page 78)

78
– [WIDE SELECT]
– [X.V.COLOR]
– [
INDEX SET]
– [FILE NO.]
– [
IMAGE SIZE]
– [ / INDEX SET]
– [ DISPLAY]
– [ INTERVAL SET]
– [VOLUME]
– [BEEP]
– [TV TYPE]
– [COMPONENT]
– [CLOCK SET]
– [AREA SET]
– [DST SET]/[SUMMERTIME]
– [
LANGUAGE SET]
– [DEMO MODE]
– [TIMING] and [RECORD SOUND] in
[SMTH SLW REC]
Your camcorder gets warm.
• This is because the power has been turned
on for a long time. This is not a
malfunction.
The supplied Remote Commander
does not function.
• Set [REMOTE CTRL] to [ON] (p. 69).
• Insert a battery into the battery holder with
the +/– polarities correctly matching the +/–
marks (p. 102).
• Remove any obstructions between the
Remote Commander and the remote sensor.
• Point the remote sensor away from strong
light sources such as direct sunlight or
overhead lighting. Otherwise, the Remote
Commander may not function properly.
Another DVD device malfunctions
when you use the supplied Remote
Commander.
• Select a commander mode other than DVD
2 for your DVD device, or cover the sensor
of your DVD device with black paper.
The power abruptly turns off.
• When approximately 5 minutes have
elapsed while you do not operate your
camcorder, the camcorder is automatically
turned off (A.SHUT OFF). Change the
setting of [A.SHUT OFF] (p. 69), or turn
on the power again, or use the AC Adaptor.
• Charge the battery pack (p. 16).
The /CHG (charge) lamp does not
light while the battery pack is being
charged.
• Slide the POWER switch to OFF (CHG)
(p. 16).
• Attach the battery pack to the camcorder
correctly (p. 16).
• Connect the power cord to the wall outlet
properly.
• The battery charge is completed (p. 16).
• Set the camcorder onto the Handycam
Station securely (p. 16).
The /CHG (charge) lamp flashes
while the battery pack is being
charged.
• Attach the battery pack to the camcorder
correctly (p. 16). If the problem persists,
disconnect the AC Adaptor from the wall
outlet and contact your Sony dealer. The
battery pack may be damaged.
The remaining battery time indicator
does not indicate the correct time.
• The ambient temperature is too high or too
low. This is not a malfunction.
• The battery pack has not been charged
enough. Fully charge the battery again. If
the problem persists, replace the battery
pack with a new one (p. 16).
• The indicated time may not be correct
depending on the environment of use.
Batteries/Power sources