Sony PEG-N710C - Manual (Page 18)

18
Installing the software
Installing the OpenMG Jukebox software
Install the OpenMG Jukebox software to the hard disk of your
computer.
Notes
• Be sure to install the software before placing your CLIE handheld which is in
the transfer mode in the cradle. Do not install the software while a dedicated
USB cable is connected to your computer.
• If the “Installing:” message continues to appear without advancing to the next
step for some time, click the “InstallShield Wizard” on the taskbar.
1
Exit all applications and follow the steps below on your
computer.
2
Insert the installation CD-ROM into the CD-ROM drive of
your computer.
The setup program starts automatically.
3
Click to select Audio Software.
4
Click to select Install OpenMG Jukebox for CLIE.
The installation starts.
Follow the instructions displayed on the screen.
After the installation is completed, the installation screen reappears.
If you have already used OpenMG Jukebox Ver.1.x
After the installation is completed, click Exit to close the installation
program. Then install the plug-in file according to the instructions on page
17.
5
After the installation is completed, click to select “Yes,
restart computer now,” and then click Finish.
The installation ends and your computer is restarted.
Note
Do not delete, move, or edit the installed folders using Windows Explorer or
any other application. If you do so, the OpenMG Jukebox database may become
unstable or corrupted.