Attaching the speaker pads – Sony SS-RG440 User Manual

Page 7

Advertising
background image

Ge
tting Star

te

d

7

GB

3

Connect the FM and AM antennas.

Set up the AM loop antenna, then connect
it.

Note

Keep the antennas away from the speaker cords.

4

For models with a voltage selector, set
VOLTAGE SELECTOR to the local
power line voltage.

Refer to the print on your system’s
VOLTAGE SELECTOR for available
settings.

* Saudi Arabian model: 120 – 127 V

5

Connect the power cord to a wall
outlet.

The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.

If the plug does not fit the wall socket,
detach the supplied plug adaptor (only for
models equipped with an adaptor).

Inserting two R6 (size AA)
batteries into the remote

Note

If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.

Tip

With normal use, the batteries should last for about six
months. When the remote no longer operates the
system, replace both batteries with new ones.

Attaching the speaker pads

Attach the supplied front speaker pads to the
bottom of the speakers to stabilize the speakers
and prevent them from slipping.

Front speaker (Left (4)/Right (4)) for MHC-
GX45/GX25/RG440S/RG310 and MHC-
RG220

Extend the FM lead antenna horizontally

AM loop
antenna

E

e

e

E

continued

Advertising
This manual is related to the following products: