Press o return – Sony RDR-GX300 User Manual
Page 28
28
If you connected a cable box or satellite
receiver to the recorder and set “Set Top Box
Control” to “On,” enter the TV channel
number on your cable box.
If you connected a cable box and set “Set Top
Box Control” to “Off,” enter the cable box
output channel (Usually 2ch, 3ch, or 4ch). See
the instructions supplied with your cable box
to confirm the cable box’s output channel.
8
Repeat steps 5 to 7 for each guide channel
number that does not match the TV channel
number.
9
Press SYSTEM MENU repeatedly to exit the
menu.
To return to the previous step
Press O RETURN.
To check the channel settings
When displaying the “Set VCR Plus+ Channels”
menu, select “Channel List,” then press ENTER.
The display lists the channels for which the guide
channel number does not match the TV channel
number.
To go to the next page, press
m.
To return to the previous page, press
M.
Settings - VCR Plus+ Channel List
Guide CH
TV CH
2
4
6
10
11
25
28
-
-
-
-
-
-
-
21
32
9
121
13
36
2
Guide CH
TV CH
45
53
- -
- -
- -
- -
- -
-
-
-
-
-
-
-
18
5
- -
- -
- -
- -
- -
Close
Page1