Sony KDF-E60A20 - Manual (Page 23)

Connecting the TV
21
Co
nnec
ting the
T
V
KDF-E55/60A20
2-593-962-11(3)
Cable Box and
Antenna For best results, use this connection if:
❑
Your cable company scrambles some channels, such as premium
channels (which requires you to use a cable box), but does not scramble
all channels.
❑ You do not have a VCR. (If you have a VCR, see pages 32 and 33.)
With this connection you can:
❑
Use the TV’s remote control to change channels coming through the
cable box to the TV’s cable input. (You must first program the remote
control for your specific cable box; see “Programming the Remote
Control” on page 44.)
❑ Use the TV’s remote control to change channels coming directly into
the TV’s VHF/UHF input jack.
Notes on Using This Connection
Before connecting a
cable box, see “Using
CableCARD Device” on
page 25.
IN OUT
VHF/UHF Cable
CATV cable
Rear of TV
Cable box
Coaxial
cable
Antenna
cable
To Do This ... Do This ...
Use the cable box Tune the TV to the channel the cable box is set to (usually channel 3
or 4) and then use the cable box to switch channels.
Set up the TV remote control to operate the cable
box Program the remote control. See “Programming the Remote
Control” on page 44.
Activate the remote control to operate the cable
box Press SAT/CABLE (FUNCTION) once, and the SAT/CABLE
indicator lights up.
Prevent the accidental switching of TV channels When using the cable box, ensure that the TV remains tuned to the
channel that the cable box is set to (usually channel 3 or 4).
Switch the TV’s input between the cable box and
antenna
Press ANT to switch back and forth between the TV’s VHF/UHF
(scrambled channels) and CABLE (unscrambled) inputs.