Sony KDL-60EX645 - Manual (Page 12)

12
• An HDMI or Component video (YP
B
P
R
) connection is required to view 480i, 480p, 720p, 1080i
and 1080p video formats. 1080/24p is available only with HDMI connection.
4 CABLE/
ANTENNA RF input that connects to your Cable or VHF/UHF antenna.
5 VIDEO IN 1/
COMPONENT
IN/R-AUDIO-L
(MONO) This input port can be used as a composite video input (VIDEO 1) or as a
component video input (COMPONENT). For composite use, connect the
yellow jack to Y for video and use audio L (mono) and R for audio signal.
For component connection, use Y, P
B
, P
R
for video signals and also
connect the audio L (mono) and R for audio signal.
This TV can auto detect and switch between the VIDEO 1 and
COMPONENT when VIDEO 1 or COMPONENT is connected.
To set to auto detection, press HOME, select Settings, and then select the
Setup settings. Select the Video1/Component Selection option in AV
Setup then set to Auto.
6 AUDIO OUT Connects to the audio input jack of your analog audio equipment. You can
use this output to listen to your TV’s audio through your stereo system.
7 LAN You can enjoy contents stored in DLNA Certified™ devices via a network
(page 35), and also IPTV, Yahoo! Widgets and Internet Browser are
available.
8 USB Connects to USB equipment to access photo, music, and video files.
A standard USB mouse and USB keyboard can also be connected to the
USB ports. An USB mouse or USB keyboard can only operate while
navigating on the internet browser (page 44).
0 VIDEO IN 2
VIDEO/L
(MONO)-
AUDIO-R Connects to the composite video output jack of video equipment.
If you have mono equipment, connect its audio output port to the TV’s L
(MONO) audio input port.
Item Description